DM542 Stepper Motor Driver 18-50VDC Microstep Driver 2-Phase
Application:
It can be applied in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving machine, CNC machine and so on. It always performs well when it is used in equipment which requires for low-vibration, low-noise, high-precision and high-velocity.
Digital hybrid stepper motor driver:
Features:
1. Adoption of 32-bit DSP, pure sine wave subdivision technology
2. Low-noise, low-vibration and low temperature rising
3. Voltage 18-50VDC
4. With 8 stalls output current setting, peak current 4.2A
5. With16 stalls microstep subdivision setting
6. Automatic half current, self-test, over voltage, under voltage, over current protection
7. Internal optical isolation, highest frequency response 200KHZ.
8 Suitable for current range 1-4.2A nema23, nema34 2,4-phase Hybird stepper motor
Current selection
| Peak | RMS | SW1 | SW2 | SW3 |
| 1.00A | 0.71A | on | on | on |
| 1.46A | 1.04A | off | on | on |
| 1.92A | 1.36A | on | off | on |
| 2.37A | 1.69A | off | off | on |
| 2.84A | 2.03A | on | on | off |
| 3.32A | 2.36A | off | on | off |
| 3.76A | 2.69A | on | off | Off |
| 4.20A | 3.00A | off | off | off |
Microstep Selection:
| Pulse/Rev | SW5 | SW6 | SW7 | SW8 | | 400 | off | on | on | on | | 800 | on | off | on | on | | 1600 | off | off | on | on | | 3200 | on | on | off | on | | 6400 | off | on | off | on | | 12800 | on | off | off | on | | 25600 | off | off | off | on | | 1000 | on | on | on | off | | 2000 | off | on | on | off | | 4000 | on | off | on | off | | 5000 | off | off | on | off | | 8000 | on | on | off | off | | 10000 | off | on | off | off | | 20000 | on | off | off | off | | 25000 | off | off | off | off | |
Dimensions:
Product Tags:
|
|
2h Microstep Driver Dm542 Stepper Motor Driver Nema 23 Nema 34 4a 18-50VDC Images
|
